Profile Information
Following
 |
 |
 |
My Chatter
new ford narrowed 9" is done and painted now to work out that tilt front end
17 weeks 6 days ago
building new tubs and trunk floor
22 weeks 1 day ago
finishing another long work week tomarrow but thats ok, my new third member should be ready tomarrow
22 weeks 6 days ago
working on roll out,tilt front end on our blown 47 plymouth coup. I dont like leaning over those front fenders.
27 weeks 3 days ago
There are no tweets to display right now.
My Blog
24 weeks 6 days ago | 25 views, 2 comments ( new)
tilt front end for 47 plymouth: “I am going to attemp to make a new inner structure for the hood and fenders from 5/8" stainless hydraulic tube and attach it to the trick little slide mounts that I made to allow the frontend ****. to slide…” read more
26 weeks 5 days ago | 18 views, 2 comments ( new)
TCI Mustang front end: “I installed a TCI front end under the old plymouth coup and had a very good experience doing it! The only trouble I had was getting the springs installed and several people told me to either cut the springs or…” read more
27 weeks 3 days ago | 12 views, 0 comments ( new)
24 weeks 6 days ago | 25 views, 2 comments ( new)
tilt front end for 47 plymouth: “I am going to attemp to make a new inner structure for the hood and fenders from 5/8" stainless hydraulic tube and attach it to the trick little slide mounts that I made to allow the frontend ****. to slide…” read more
26 weeks 5 days ago | 18 views, 2 comments ( new)
24 weeks 6 days ago | 25 views, 2 comments ( new)
tilt front end for 47 plymouth: “I am going to attemp to make a new inner structure for the hood and fenders from 5/8" stainless hydraulic tube and attach it to the trick little slide mounts that I made to allow the frontend ****. to slide…” read more
26 weeks 5 days ago | 18 views, 2 comments ( new)
TCI Mustang front end: “I installed a TCI front end under the old plymouth coup and had a very good experience doing it! The only trouble I had was getting the springs installed and several people told me to either cut the springs or…” read more
27 weeks 3 days ago | 12 views, 0 comments ( new)
24 weeks 6 days ago | 25 views, 2 comments ( new)
tilt front end for 47 plymouth: “I am going to attemp to make a new inner structure for the hood and fenders from 5/8" stainless hydraulic tube and attach it to the trick little slide mounts that I made to allow the frontend ****. to slide…” read more
26 weeks 5 days ago | 18 views, 2 comments ( new)
TCI Mustang front end: “I installed a TCI front end under the old plymouth coup and had a very good experience doing it! The only trouble I had was getting the springs installed and several people told me to either cut the springs or…” read more
27 weeks 3 days ago | 12 views, 0 comments ( new)
My Images
My Videos
There are currently no videos to display
There are currently no videos to display
There are currently no videos to display
There are currently no videos to display
